Description
This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD, in 2280, 2260, 2242 and 2230 format, and a 2.5 inch or 3.5 inch SATA HDD or SSD through the USB interface.
Clone Function without PC
The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA and SATA to NVMe.
Specification
-
Connectors:
1 x USB 10 Gbps USB Type-C™ female
1 x M.2 key M slot
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
-
Chipset: JMicron JMS581D
-
Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M based on PCIe (NVMe)
-
Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported
-
For 2.5 inch and 3.5 inch SATA HDD / SSD
-
Supports NVM Express (NVMe)
-
Supports S.M.A.R.T.
-
Supports TRIM
-
Supports Native Command Queuing (NCQ)
-
Data transfer rate up to 10 Gbps
-
Supports UASP
-
7 x LED indicator for power, access and copy status
-
Bootable
-
Function key:
1 x Clone button
1 x On / Off switch
1 x switch for clone mode
-
Dimensions (LxWxH): ca. 107 x 35 x 24 mm
-
Hot Plug, Plug & Play
Power supply specification
-
Wall power supply
-
Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
-
Output: 12 V / 3 A
-
Ground outside, plus inside
-
Dimensions:
inside: ø ca. 2.5 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
System requirements
-
Android 11.0 or above
-
Chrome OS
-
Linux Kernel 5.15 or above
-
Mac OS 12.4 or above
-
Windows 10/10-64/11
-
iPad Air (4th Generation) or above
-
iPad Pro (3rd Generation) or above
-
SurPro 7
-
PC or laptop with a free USB Type-A port or
-
Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or Thunderbolt™ 4 port
Package content
-
USB Type-C™ converter
-
Cable USB-C™ male to USB-C™ male, length ca. 80 cm
-
Cable USB-C™ male to USB Type-A male, length ca. 80 cm
-
3 x rubber nipple
-
External power supply 12.0 V / 3.0 A
-
User manual
Package
Here you can find information about M.2
Here you can find information about USB Type-C™ + USB 5/10/20 Gbps
Lees verder
Lees minder
Kenmerken
| General
|
| Function | bootable
|
| · | Clone Function
|
| Suitable for data medium | 2.5″
|
| · | 3.5″
|
| Supported operating system | Chrome OS
|
| · | Surface Pro 7
|
| · | Windows 10 32-Bit
|
| · | Windows 10 64-Bit
|
| · | iPad Pro (3rd Generation) or above
|
| · | iPad Air (4th Generation) or above
|
| · | Windows 11
|
| · | Mac OS 12.4 oder höher
|
| · | Android 11.0 or above
|
| · | Linux Kernel 5.15 or above
|
| LED indicator | 7 x
|
| Slot | PCIe
|
| Supported module | M.2 modules in format 2280, 2260 and 2242 with key M or key B+M based on PCIe
|
| Interface
|
| Connector 1 | 1 x USB 10 Gbps USB Type-C™ female
|
| Connector 2 | 1 x SATA 6 Gb/s 22 pin receptacle
|
| Connector 3 | 1 x 67 pin M.2 key M slot
|
| Connector 4 | 1 x 12 V DC jack
|
| Technical Characteristics
|
| Chipset | JMicron JMS581D
|
| Data transfer rate | 10 Gbps
|
| Physical Characteristics
|
| Colour | black |
Lees verder
Lees minder
