Description
This USB Type-A to serial DB9 adapter with RS-232 tester by Delock combines two functions in one device. The RS-232 interprovides a connection for serial printers, measuring devices, machines etc. In addition, the nine LEDs in the connector provide simultaneous information on the status of the RS-232 data and the USB voltage supply. The RS-232 tester can be used for troubleshooting and helps to analyze the serial control and data lines.
Specification
• Connectors:
1 x USB Type-A male
1 x serial RS-232 DB9 male
• Serial connector with nuts
• Chipset: FTDI FT231XS
• Data transfer rate up to 460.8 Kbps
• FIFO: 512 Byte - RX
• FIFO: 512 Byte - TX
• Databits: 7, 8
• Stop bits: 1, 2
• Parity: even, odd, none, mark, space
• ±15 kV ESD protection for all serial signals
• Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
• LED indicator: 9 x bicolour, red (V+), green (V-)
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, USB-PWR
• Operating temperature: -40 °C ~ 85 °C
• Cable length incl. connectors: ca. 2 m
System requirements
• Linux Kernel 4.9 or above
• Mac OS 10.15 or above
• Windows 8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• USB Type-A to 1 x serial adapter
• Driver CD
• User manual
Package
• White Box
Here you can find information about RS-232
Lees verder
Lees minder
Kenmerken
| General
|
| Function | Plug & Play
|
| Specification | RS-232 (EIA / TIA)
|
| · | USB Type-C™
|
| Supported operating system | Linux Kernel 2.6 or above
|
| · | Mac OS 10.13 or above
|
| · | Windows 10 32-bit
|
| · | Windows 10 64-bit
|
| · | Windows 8.1 32-bit
|
| · | Windows 8.1 64-bit
|
| LED indicator | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, PWR
|
| Protection | ESD (Electrostatic Discharge)
|
| Interface
|
| Output | 1 x serial RS-232 DB9 male
|
| Input | 1 x USB Type-C™ male
|
| Technical Characteristics
|
| Operating voltage | 5 V / 90 mA
|
| Chipset | FTDI FT231XS
|
| Data transfer rate | up to 460,8 Kbps
|
| FIFO | 2 x 512 Byte
|
| Operating temperature | -40 °C ~ 85 °C
|
| Signal transmission | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
|
| Data transmission | asynchronous
|
| · | full duplex
|
| · | Bi-directional
|
| UART | USB to serial UART
|
| Data bits | 7, 8
|
| Physical Characteristics
|
| Ferrite core | 2 x
|
| Housing material | Plastic (ABS)
|
| Weight | 26 g
|
| Cable type | UL Recognized Component
|
| · | UL AWM 2725 80°C 30V
|
| Cable colour | black
|
| Cable length incl. connector | 2 m
|
| Pin finishing | gold-plated
|
| Conductor gauge | 28 AWG data line
|
| · | 26 AWG power line
|
| Shielding | double
|
| Colour | black
|
| Overvoltage protection | 15 kV
|
| Thread type | 4-40#
|
| Insulator | PVC
|
| LED colour | red
|
| · | green
|
| Cable diameter | 4.5 mm |
Lees verder
Lees minder
