Shuttle PC63J 500W Power Supply Upgrade Kit for Shuttle XPCs

500W Power Supply Upgrade Kit for Shuttle XPCs - Turn your XPC into a high-performance system

The Shuttle XPC Accessory PC63J is a new high-end power supply with a maximum output wattage of 500W suitable for XPCs with J-series case. With a low noise level of only 30dB, it is ideal for use in any noise-sensitive environments such as a library and offices. Thanks to its 80 PLUS Bronze certification for power-efficient devices, this power supply is also suitable for ENERGY STAR® compliant systems. Benefit from less power consumption and less energy costs using PC63J.

• Model: Shuttle XPC Accessory PC63J (power supply)
• Output wattage:
  Total combined output is 500W max.
  Total combined output of 3.3V and 5V is 130W max.
  Active PFC circuit (Power Factor Correction)
• Input Voltage/Frequency range:
  100~240V AC, 50/60Hz
  (90~264V AC, 47~63 Hz)
• Input current:
  max. 8A/4A for 115V/230V AC during normal operating
  Inrush current: 60A/90A for 115V/230V AC
• DC voltage output, max. output current:
  +12V1: 16A
  +12V2: 16A
  +12V3: 17A
  +3.3V: 18A
  +5V: 16A
  +5VSB: 2.5A (Standby)
  -12V: 0.3A
• Power Connectors:
  1x ATX power with 20 pins
  1x ATX 12V power with 4+4 pins *)
  1x PCIe power with 6 pins
  1x PCIe power with 6+2 pins
  3x Serial ATA power
  2x Molex power
  1x Floppy power
• Output voltage timing:
  Hold up time: >17ms at full load at 115V AC
  Rise time: <20ms at full load, nominal line
• Protection:
  Short circuit protection (SCP) - Latch off
  Overpower (overload) protection (OPP)
  Overcurrent protection (OCP)
  Overtemperature protection (OTP)
  Overvoltage protection (OVP)
  Undervoltage protection (UVP)
• Efficiency:
  80PLUS Bronze compliant
  The PSU provides at least 82/85/82% efficiency at 20/50/100% load.
• Certification:
  EMI/RFI: FCC class B, CE, BSMI, CCC
  Safety: cUL, TÜV type approved, CB, BSMI, CCC
  Timing, housekeeping and control conform Intel ATX12V Specific Guidelines 2.3
• Mean Time Between Failures (MTBF)
  > 100.000 hours at 75% load, 25°C
• Temperature:
  Operating temperature: +10°C ~ +50°C
  Storage temperature: -40°C ~ +70°C
• Noise:
  <30dB at 50cm for 200W load
  50mm ball bearing fan with thermal Fan-speed control
• Dimensions: 200 x 82 x 53 mm (LWH)
• Scope of delivery: power supply and 4 screws
• Weight: net weight: 1.1 kg, gross weight: 1.2 kg
• Compatibility:
  Supported Shuttle XPC models: SG41J1 series, SH55J2, SX58J3
  Cable lengths designed for the Shuttle XPC.

*) Universal ATX12V plug
The ATX12V plug of the power supply consists of two 4-pin plugs, which can be combined to one single 8-pin plug. They can easily be separated again by using long-nosed pliers.